Pulverized coal briquetting machine is a kind of equipment for pressing powdery materials into balls. It is mainly used for cold pressing pellets and refractories of pulverized coal, slime, medium coal, coke powder, coking coal and metallurgical powder. All powdery materials that need to be put into the furnace need a ball press to complete.

At present, many users choose vertical mixers in powder or feed processing, but experts point out that vertical mixers have many shortcomings, and their maintenance rate is also very high. It is recommended to choose horizontal mixers. The mixing efficiency is very high, the mixing quality is very good, and the discharge time is short. There are many types of horizontal mixers on the market, and the quality is good or bad. So, how should users buy a horizontal mixer with high cost performance? Let's find out together.

Horizontal mixers are widely used in putty paste, real stone paint, dry powder mortar, thermal insulation mortar, ready-mixed mortar, dry-mixed mortar, trench joint agent, interface agent, perlite thermal insulation mortar, hollow microbead dry powder mortar, putty, medicine, food , chemicals, feed, ceramics, refractories and other solid-solid (ie powder and powder), solid-slurry (ie powder and glue) mixing, especially suitable for viscous material mixing.

Now the coal briquette press industry technology innovation, product types are also diversified development, the status of coal briquette press is also more and more important, but the briquette press molding demoulding often appear when the demoulding unfavorable situation. So what are the factors that affect the demoulding effect of coal briquetting machine?

With the arrival of summer, the temperature is also rising, summer thunderstorm season how to maintain the briquette machine, in such a thunderstorm season how to maintain can make the briquette machine’s life longer? Here to remind the use of briquette machine production of user friends, be sure to do a good job of briquette machine maintenance work, the following is to say into the summer briquette machine maintenance of the five matters needing attention.

Solid mixers are relatively simple low-investment equipment, and most mixers can simply be classified and offered options based on the mixing mechanism applied. In the last issue, we introduced the working principle of the mixer and the type of the mixer. Now we will simply introduce the method of selecting the mixer.

Solid mixing technology is mainly used in pharmaceutical, food, pesticide, chemical and other industrial production, the application is extremely wide. In the pharmaceutical production, for the preparation of raw materials or product standardization and homogenization, the mixer is an indispensable device.

BB fertilizer is usually called blended fertilizer, which is a kind of compound fertilizer with at least two nutrients of nitrogen, phosphorus and potassium in specified amounts made by dry mixing method. In the process of BB fertilizer production, the mixing process is the key link to determine the product quality and production efficiency. As the leading equipment in the mixing process, the performance of the mixer will directly affect the product quality and production efficiency. This article briefly introduces the 12 tons per hour BB fertilizer mixing equipment.

The compressive strength of different types of desiccated sludge briquette is obviously different with the addition proportion,The product is generally used in mining, sewage sludge, medical sludge treatment.Mainly due to the different composition of sludge itself will also cause the difference in its cohesiveness, generally expressed in water content, inorganic matter and the different unit points contained.

Mixing equipment is widely used in food engineering, chemical engineering, biological engineering and other industries. They have an important impact on the process effect and product quality. Along with the gradually perfect and mature production technology, the technological parameters of mixing equipment, structure and stability, especially in the process operating conditions under the condition of same capacity only different, this kind of device is often just the difference of shape size, volume, power, size, number of assembly structure of the equipment, spare parts and types are basically the same. This provides necessary conditions for the standardization, standardization and modular design of mixing equipment. This paper briefly introduces the development of 3d parametric CAD system for mixing equipment.