The production of calcium magnesium phosphate fertilizer by blast furnace method has certain requirements on the particle size of phosphate rock and flux entering the furnace. Screening off fine ore less than 10mm is one of the important prerequisites for smooth operation, high yield, stable yield and low consumption of blast furnace. However, at present, the content of fine ore in the raw phosphate ore is as high as 20-40%, so the treatment of fine ore has become an urgent problem to be solved in the current phosphate fertilizer plant.

HPS mixed pellet sintering belongs to the small pellet sintering process, which is to mix iron ore powder, returned ore, flux and fuel with water to make small balls with a diameter of 5-10mm, wrap a certain proportion of solid fuel on the surface of the small balls, and then sinter. Compared with the common sintering method, the small pellet sintering method has increased the process links of strengthening granulation and rolling pulverized coal outward.

Mixed granulation process is a very important link in sintering production process. High intensity mixing is to mix all kinds of materials in the batching process evenly. Granulation is to make materials into mixed materials with appropriate particle size and good air permeability.

It is necessary to ensure that foamed acid (foamed dilute sulfuric acid formed after the liquid formed by mixing concentrated sulfuric acid, water and foaming agent is foamed by compressed air) fully wetts the lint on the surface of cotton seed, The mixing quality of cotton seed and foamed acid is directly related to the consumption of concentrated sulfuric acid, water and foaming agent, and affects the productivity of subsequent drying and defoiling equipment and the amount of residual acid in seeds.

The stirring system of VKM-5 Twin-shaft differential vertical kneader consists of mixing kettle, solid paddle and hollow paddle. The inner wall of the mixing kettle is a hollow thermal insulation layer, which is filled with 30 ℃ constant temperature water provided by the water supply system. The hollow paddle and the solid paddle are vertically installed.

Forced conveying device with mixing function is one of the important equipment in plastic extrusion production line. The device adopts a screw with left and right rotation, driven by a deceleration motor. The materials at both ends of the screw are simultaneously transported to the middle of the screw by utilizing the conveying mechanism of the screw thread. When the materials transported in the left and right directions merge in the middle of the screw, some materials are forcibly transported to the processing equipment through the material conveying port which is in the middle of the mixing bin. Thus realizing the forced conveying function of the materials.